How do I setup a program?
Open the vacuum sealer lid, turn main switch to ON position, P1 will appear.
Press the S key to open a program and move forward.
- LED 1: VACUUM %
a) Set Vacuum Percentage:
Use the UP & DOWN keys to select the vacuum percentage (at 99.9% machine offers Extra Vacuum Time).
Press the S key to move forward.
b) Set Extra Vacuum Time:
Use the UP & DOWN keys to select your desired value (up to 30 seconds).
Press the S key to move forward.
- LED 2: INERT GAS % [Optional]
Use the UP & DOWN keys to select the percentage of inert gas injection.
Press the S key to move forward. - LED 3: SEALING TIME
Use the UP & DOWN keys to select the sealing time in seconds.
Press the S key to lock in the data. - LED 4: AIR RETURN
No programming necessarry.
We recommend to save following 4 most common used programs into your machine: |
Minipack does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information.