How do I calibrate the vacuum sealer?

  1. Open lid, turn main power switch to ON position, after 30 seconds machine will display PROGRAM.

  2. Hold the STOP key (red key; located left to the display) down for 6 seconds, machine will display CALIBRATE.

  3. Press the DOWN ARROW key 10x until CALIBRATE is highlighted, close lid to start.

  4. Display will increment down and eventually stop decreasing.

  5. Depress the STOP key and open the lid, machine will return to regular operation after 6 seconds.

  6. SAVING DATA appears on the display. The vacuum sealer is now calibrated to its environment and ready for use.

Minipack does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information.