How do I reset the code "OIL" on the vacuum sealer?

The "OIL" code is on your display because your machine has reached over 12,000 cycles. This means it's now time to change the oil. Before changing the oil, the code needs to be reset:

  1. To reset the "OILcode, press and hold the UP and DOWN buttons together for about 5 seconds.

  2. The "OIL" code will disappear and the display will show the last program number (P1, P2,...)

  3. Please check/change the oil as necessary.
    → How do I change the oil?

  4. Calibrate the machine after the oil change to assure proper vacuum pressure levels.
    → LED Display: How do I calibrate the vacuum sealer?

Minipack does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information.