How do I install a foot switch on a Media?

foot switch

1. Remove the switches cover plate screws and carefully pull out the plate and let it rest on the side. 

foot switch 2

2. Route the foot switch wire from underneath the machine and through the switch plate opening.

foot switch 3

3. Connect the 2 wires from the foot switch to the START button connector. 

4. Secure the foot switch cord to the metal bar inside the plate opening with a cable tie. 

5. Remount the switch plate into the opening and tighten the screws. 

Minipack does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information.